The next step is to throw everything away and start over. :{(
What I didn't notice while I was happily bending the tube is that the inside die, which is made of plywood, had split and allowed the tube to crumple. The outside of the bend looks great, but the inside was a mess. Likely, the tubing is work-hardening as it bends and needs to be re-annealed a couple more times. Also, the setup would be much stiffer if it were in a proper arbor press with metal dies. Given that the flow rate through this part is tiny, it wouldn't have made a difference but as this proved not to be a viable method for making a bunch of these, I went back to the original plan of hard brazing parts together.
What I didn't notice while I was happily bending the tube is that the inside die, which is made of plywood, had split and allowed the tube to crumple. The outside of the bend looks great, but the inside was a mess. Likely, the tubing is work-hardening as it bends and needs to be re-annealed a couple more times. Also, the setup would be much stiffer if it were in a proper arbor press with metal dies. Given that the flow rate through this part is tiny, it wouldn't have made a difference but as this proved not to be a viable method for making a bunch of these, I went back to the original plan of hard brazing parts together.
No comments:
Post a Comment