Miata aftermarket alarm system uninstall

Gathering information for taking out the aftermarket alarm which is draining the battery with a dark current of about 50ma...

Wiring diagrams for the 2000 nb
http://neomiata.com/garage/index.php?path=Wiring+Diagrams/


Wire list used by alarm installers for 2000 miata
http://alarmsellout.com/support/diagrams/vehicle/MAZDA%20MIATA%201990-2005.pdf

WIRE	COLOR	LOCATION
12V CONSTANT WIRE	WHITE/RED	Ignition Harness
STARTER WIRE	WHITE/BLACK	Ignition Harness
12V IGNITION WIRE	RED/BLACK	Ignition Harness
SECOND 12V IGNITION WIRE	BLACK/RED	Ignition Harness
12V ACCESSORY WIRE	GREEN/RED	Ignition Harness
POWER DOOR LOCK	Must add actuator in doors
POWER DOOR UNLOCK	Must add actuator in doors
PARKING LIGHTS (+)	RED/BLACK	Rear Of Dimmer Switch
PARKING LIGHTS (-)	LT.GREEN	Harness At Steering Column
DOOR TRIGGER/DOME LIGHT SUPERVISION (-)	WHITE/RED	Harness In Driver’s Kick Panel
TACHOMETER	BROWN or BROWN/YELLOW	Ignition Coil
BRAKE WIRE (+)	GREEN	At Brake Pedal Switch
HORN TRIGGER (-)	GREEN/ORANGE	Harness At Steering Column
LEFT FRONT WINDOW UP	GREEN/RED	In Center Console
LEFT FRONT WINDOW DOWN	WHITE/RED	In Center Console
RIGHT FRONT WINDOW UP	RED/BLACK	In Center Console
RIGHT FRONT WINDOW DOWN	RED/GREEN	In Center Console

... And here is the offending 20mA brainstem parasite. One relay on the ignition starter wire, power drawn from the 12v constant wire for the control module and the siren, and multiple harnesses to the door trigger, a mercury switch in the trunk, a contact in the hood, a led in the console and to the headlight relay. Good riddance!